+86
Basic product parameters
Part OE Number: 752W41701-5060Product Name: C7H Cab Front SuspensionAdjustment Rod Assembly Applicable Models:C7H Truck Shandeka C7H Tractor and Truck CoreFunction: Connect the cab height valve with thefront suspension bracket, control airbag inflationand deflation, and adjust the cab height balance.Structural configuration: Bidirectional ball joint +adjustable lead screw, length, free fineadjustment
Surface process: Galvanized carbon steel body for rust prevention, and the ball joint is built-in wear-resistant.
Rubber bushing
Five Core Product Advantages
1.Original factory 1:1 mold opening non-destructive installation without modification
Strictly compare with the original Shandeka C7H vehicle datafor production, the ball joint installation hole spacing at bothends, and the thread adjustment stroke are fully matched. Therepair shop replaces the equipment without cutting, makingdisassembly and assembly simple and time-saving.
2. Precise control of the airbag height to ensure the cab does not tilt.
When the vehicle’s load changes, the adjustment rodlinkage height valve automatically inflates or deflatesthe airbag, always maintaining the left and right cablevel, and preventing one-sided tilt, rollbackmovement, and line-of-sight deviation.
3. Adjustable lead screw, suitable for variousmodifications/chassis operating conditions. The centraltelescopic adjustment structure allows for slightadjustment of the total length, raised chassis, and theairbags can be matched after replacement. It offersenhanced versatility and eliminates the need foradditional accessories
4. Thickened ball joint + rubber bushing, durable andnon-no abnormal noise. The ball joint is integrallyforged and formed, with a built-inhigh-wear-resistant rubber buffer sleeve. It filtersroad vibrations, prevents heavy loads, and does notproduce looseness or abnormal metal impactnoises. Its service life is much longer than that ofordinary thin pull rods.
5.Zinc plating protection process making it less prone to corrosion in rainy and snowy mountainous areas.
The integral lead screw and connectors are hot-dipgalvanized, resistant to mud water, snowmelt salterosion, rust and jamming during long-termoutdoor use, and ensure smooth adjustmentwithout jamming.
Recommended replacement fault scenarios
1. The cab is uneven on both sides and has a one-sided tilt.
2. Over-speed reduction, severe cab shaking on a broken road, and unusual noises inside the vehicle
3. High valve efficiency, frequent airbag inflation and deflation, and fluctuating body height Low
4. The original vehicle adjustment rod balljoint is loose, and the lead screw corrosion cannot be adjusted
5. The entire front airbag system for the cab is overhauled, and the chassis is easy to maintain and replace.
Damaged parts
