+86
ProduduoSpecifications
Part Number: Z953147000059
Name: Steering Arm and Support Device (Steering Arm Support)
Material: 40Cr die-forged alloy steel
Applicable structure: Double front axle and two-axle steering system
Vehicle-compatible
Sinotruk Howo TX, HOWOMAX, and Howo N5G/N7G NewThis model is suitable for dualfront axle tractors, cargo trucks, and allseries of National V and National VgReplace
Avantages du produit
1. The body is formed as a single unit, offering high strength and difficulty in handing heavy loads
Deformation fracture
2. Thickened dense ball joint, built-in grease, dustproof and waterproof,Longer lifespan
3. Original factory standard installation hole positions, non-destructive direct installation, no calibration required.Repair shop quick disassembly and assembly
1. Vehicle electrophoretic rust preventive coating, prolonged rain and snow, and construction site conditions are not suitable.
Prone to rust and corrosion
. Precise transmission angle,ensuring synchronized forward direction reduction of both front and front axles
Tire wear
Fault replacement scenario
· Abnormal noise when the chassis passes through the pit, excessive steering clearance, and a false steering wheel position
Obviously
The vehicle is deviated, the weight of left and right steering varies, and the tire is ground on one side.
Severe damage
· The ballhead dust cover is damaged and oilleakage, and the ball head is loose and swaying
The original steering center arm is bent, the base is cracked, and the steering transmission is failed
Installation instructions
Directly fix the reserved mounting holes on the frame,connect the straight tie rods for the two bridge crosstie rods, adjust the front harness after installation, andno additional modification parts are required.
