Basic Product Information
Figure Number: WG9931470081
Applicable vehicles: Sinotruk Howo TXtractors, truck Installation locations: rearof the vehicle chassis suspension, ferryarm base position
Assembly: The complete set of transition arm, bushing, and pin shaft after matching
Suspension Accessories Usage
Core role of the product
1. Rigid fixation: As the mounting base for the rear transitionswing arm, it securely locks the swing arm structure,ensuring it does not displace or loosen during operation;
2. Load cushioning: Distribute the impact forcecaused by road bumps, distribute the tensile andtorque between the stretcher frame and the swingarm, and protect the overall suspension structure;
3. Guidance Limit: Standardize the swinging stroke of thetransition swing arm to prevent the swing arm fromshifting and rubbing against the chassis, ensuring stablevehicle operation.
Ventajas principales del producto
1. Integrated casting of steel: no joint welds, overalltensile and compressive strength, heavy-dutymountain ranges, and construction site is less likelyto break or deform during long-term use;
2. Thickened base flange: The installation flange isthickened, ensuring uniform force distribution to the holes,and the bolts are tightened without slippage or cracking;
3. Full-surface coating corrosion protection: Covered withprotective paint on the outside, resisting mud, water, salt, andalkali erosion, ensuring constant rust resistance for vehicleoperation
4. Factory: 1. Die opening, threaded holes, and shaft coredimensions fully align with the original machine, loadingwithout any grinding or protective holes, and direct alignmentinstallatio
Replace the fault scenario
1. The bracket impacts and cracks, base deformation, Loose and loose arm transition.The vehicle has deviated from its course;
2. Flange fixing hole smooth wire The boltis not locked properly. Over-pothole chassis Severe abnormal noise;
3. Long and heavy loads, poor road driving, The supportis fatigued, rusted, and thinned.Preventive replacement;
4. Pantray,The accident caused damage to the suspension bearing and chassis.Repair replacement
WG9931470081 Soporte del brazo de transición trasero
Part Number: WG9931470081 Product Name:Rear Transition Swing Arm Mount ApplicableModel: Sinotruk Howo TX Series Heavy TruckMaterial: High-strength cast steel Process:integral casting, integral electrophoreticpainting for rust prevention. Application:Transition arm after fixing the chassis, stablesuspension guide structure, and cushioningdriving loads.
Categoría: Montaje de la cabina







