+86
Product Basic Introduction
The EZ164244000016 rear suspension bracket is acore load-bearing component of the rear suspensionsystem in the cab. It is installed above the rear of theframe and supports the entire set of suspensionshock absorption components on the rear side of thecab. It is equipped with an air spring and shockabsorber for assembly and use, ensuring smoothdriving performance in the cab.
Ventajas principales del producto
1. Integrated cast steel forming: No joint welds, highintegrity, no deformation under long-term heavy load,no cracking, suitable for long-distance freight andpoor road conditions on construction sites;
2. Thick safety flange: The base is thickened at fixed points,multiple screw holes are evenly subjected to force, and thewires are easily loosened and slippery after tightening;
3. Full-piece electrophoretic rust prevention: Evencoverage of the inner and outer paint surfaces,protecting against rain, water, silt, sand, salt, and alkalicorrosion, making it less prone to rust duringlong-term outdoor use.
4. Factory: 1. Die opening dimensions: Vibrator and airspring assembly holes are accurately positioned, noneed for grinding or reaming, and direct alignmentwithout loss of safety.Act.
Fault replacement scenario
1. The seat support is impacted, cracked,deformed, the rear of the cab tilts, and thereis a significant noise during driving.
2. Base corrosion perforation,Fixed hole smooth thread, suspended vibration damping components Shaking, failure;
3.The cab has ben signifcantyrenovated. Rear suspensiot orption complete replacement. Matching replacemen Original factory bracket;
4. Long-term heavy-load fatigue loss, Preventive replacement, avoid halfway Fault.
