AZ000051001783 Middle Beam Assembly of the Frame

Basic Product Information
Part Number: AZ000051001783
Product Name: Middle Beam Assembly of the Frame
Reference wholesale price: 4,4043.36 yuan Heavy Truck Parts Network
Category: Main beam connectors for heavy truck chassis
Materiales y mano de obra
1. The integral casting and cast steel is formed by integralcasting, with grid reinforcements installed, and its torsional andcompressive strength significantly exceeding that of conventional stamped crossbeams
2. Surface rust epoxy primer spraying, rainwater, and mud corrosion Erosion, extended chassis usage,
3. Full CNC holes, all installation hole positions are perfectlyconsistent with the original vehicle, requiring no sanding ormodification, and enabling direct and non-destructive
assembly.
4. Weld reinforcement, heavy load jolting, and turning forces are difficult to open.
Crack desoldering
Core functionaalrole
Transversely connect the longitudinal beams of the left andright frames, balance the overall vehicle load, and preventone-sided distortion and elongation deformation of the mainbeam.
2. Reserve multiple installation points forsecuring the air tank, harness bracket,balance suspension, transmission auxiliarybracket, and other chassis accessories.
3. Reduce frame stress caused by heavy loads, slopeclimbing, and bumps, reduce the risk of weld tearing inlarge beams, and enhance overall vehicle driving stability.
4. Enhance the rigidity of the chassis body, reduce vehicle deviation, and loose chassis.Dispersed noise problem
Vehicle Trouble Replacement Tips
If the following chassis issues occur, it is
recommended to replace this crossbeam model:
I. The load-bearing driving disc produces unusualnoises, and the main beam sway loosely from side to
side
2. Cracking of the longitudinal welds on the frame,
and tearing of the fixing holes in the chassis bracket.
3. Each vehicle has deviated from its intended
intended sideways or experienced significant
deformation of the turning beam.
4. Deformation, corrosion perforation, fracture, and
welding of the vehicle beams
Quality Advantage
The original factory has standard mold opening
dimensions and high loading fit; factory flaw detection
and inspection, no sand holes or hidden cracks;
thickened load-bearing structure suitable for
heavy-duty working conditions such as self-unloading,
traction, and grilles; sufficient stock, supports bulk
procurement at auto parts stores and repair shops,
and can be shipped as a whole for foreign trade.