DZ91259520038 Balance Shaft Base

Product Specifications
Part Number: DZ91259520038
Product Name: Balance Shaft Base (Balance Shaft Bracket)
Installation location: Rear axle suspension, balance shaft assembly fixed base Seat
Material: High-height cast steel, integral heat treatment
Application: Fixed balance shaft, leaf spring, and heavy-duty punching on the vehicle body.
Impact force
Product Advantage
1. Original factory drawing number DZ91259520038, positioning hole, screw
The bolt hole dimensions are the same as the original vehicle, allowing direct alignment installation without the need.Change.
2. Cast steel is cast and formed in one unit, subjectedto overheating treatment, with high strength andresistance to cracking and fracture under heavy load.
3. Precision machining of bearing mating surfaces, good coaxiality, and reduced flatness Balance shaft wear, extension:Service life of the rack
4. Surface rust prevention treatment,resistance tomud and water, and suitable for complexconstruction sites and construction waste
transportation conditions.Salt-alkali corrosion, suitable
Fault replacement scenario
· Cracking and chipping of the balance shaft seat, Base deformation
. Excessive wear of the bearing housing bore, Gap mOVement
. Unusual noise from the rear axle, The body has significant vibration.
· Damage to the support caused by an accident impact
Installation Precautions
1. When placing an order, be sure to verify the original vehicle part number.
DZ91259520038, available in left and right parts and different models Balance the shaft seat and avoid incorrect purchases.
2. Check the assembly step to inspect the balance Thrust padshaft bushing, bearings, and rings for wear anddamage, and recommend replacing them together.
3. Bolts are tightened in stages according to the specified torque to prevent heavy load.The driving bolt is loose.
4. After assembly, check that the shaft hole rotates smoothly without any jamming before reinsertion.Use.